Automatic ultrasonic flaw detector×ダイヤ電子応用 - List of Manufacturers, Suppliers, Companies and Products

Lower rotating wheel / turning wheel ring gear section crack automatic ultrasonic flaw detection device

It is a device that automatically inspects for inner surface cracks and edge cracks occurring in the tooth-cutting section of the inner surface of a ring-shaped workpiece.

The "Electronic Beam Welding Ultrasonic Testing Device for Construction Machinery Mission Parts" is a device that automatically inspects for internal cracks and edge cracks occurring in the tooth-cutting area of the inner surface of a ring-shaped workpiece. 【Features】 ◎ Inspects almost the entire tooth surface ◎ Detects cracks deeper than 0.5 mm ◎ Capable of detecting not only cracks but also abnormalities in tooth cutting and core runout *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Full-body automatic ultrasonic testing device for both ends of the pipe.

This is a device for inspecting the full body of the upper structure, specifically for detecting flaws in the areas around 200 mm at both ends of the pipes that have not been inspected!

The "Full Body Automatic Ultrasonic Testing Device for Both Pipe Ends" is a device that inspects the areas around both pipe ends, approximately 200 mm, which were left untested during the full body inspection in the previous process! It features a fixed side and a movable side, allowing the workpiece to be transferred laterally and set in place for inspection. The workpiece is then rotated while conducting full body testing on both pipe ends. 【Features】 ◎ Detects slits with a depth of 0.2 mm with sufficient S/N ratio ◎ Workpiece rotation speed is 300 mm/s *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automated ultrasonic testing device for welding joints in construction columns "TOFD Plus"

Countermeasures for false detection and improvement of detection performance! Flaw detection of butt welds using pulse reflection method and TOFD method!

"TOFD Plus" is a flaw detection device that employs pulse reflection and TOFD methods for automatic inspection of butt welds in columns, enhancing detection performance and addressing false detection issues. When automatically inspecting butt welds with excess reinforcement, problems with false detection can occur. By adopting the TOFD method, inspections can be conducted without being affected by excess reinforcement, significantly improving coupling performance, and allowing for effective detection of harmful defects such as cracks. 【Specifications】 ■ Line Specification: Inline automatic operation ■ Detectable Defects: Insufficient fusion / Poor fusion / Cracks / Slag inclusion / Blowholes, etc. ■ Processing Capacity: Up to 200 mm/second ■ Data Storage: Pulse reflection images / TOFD images / Judgment results ■ Calibration Function: Automatic sensitivity calibration / Calibration inspection *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Welding Joint Automatic Ultrasonic Testing Device RODscan

Passed the certification exam of the Ministry of Land, Infrastructure, Transport and Tourism: JIS-compliant semi-automatic ultrasonic testing device for butt welds in bridges and other structures.

The "Portable Ultrasonic Testing Device for Welded Joints RODscan" is an ultrasonic testing device specifically designed for welded joints, equipped with a dynamic scanning function and compliant with JIS-Z-3070. 【Features】 ■ Lightweight and excellent for on-site work ■ Passed the certification test by the Ministry of Land, Infrastructure, Transport and Tourism ■ Performs simultaneous testing at 2-channel angles and has a pass/fail judgment assistance function *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic ultrasonic testing device for CVT projection welding joints.

A device that automatically determines the joining area and number of multiple projection welding points.

The "CVT Projection Welding Joint Automatic Ultrasonic Testing Device" is a device that automatically determines the joining area and number of multiple projection welds. It partially submerges the workpiece and rotates it while measuring the welding length of multiple projection welds to determine pass or fail. 【Features】 ◎ Line Specification: Inline automatic operation ◎ Defect Detection: Abnormal number of points / Abnormal nugget diameter / Position abnormality / Blowhole ◎ Testing Method: Partial immersion method ◎ Processing Capacity: 24 seconds per unit *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Torque converter laser welding automatic ultrasonic testing device

Automatic ultrasonic inspection of insufficient fusion and misalignment in fiber laser welding!

The "Torque Converter Laser Welding Automatic Ultrasonic Testing Device" automatically inspects for insufficient melting and misalignment in fiber laser welds using ultrasound. It is a testing device that confirms the weld immediately after laser welding. If a defect is detected, the line stops, and the cause of the defect is eliminated. 【Features】 ◎ Line Specification: Inline automatic operation ◎ Detected Defects: Insufficient melting / Misalignment ◎ Processing Capacity: 40 seconds per unit ◎ Testing Method: Local immersion method using a water nozzle *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Welding Joint Automatic Ultrasonic Testing Device "RODscan"

JIS-compliant semi-automatic ultrasonic testing device for butt welds in bridges and similar structures.

"RODscan" is an ultrasonic flaw detection device specifically designed for welds, equipped with an automatic scanning function and compliant with JIS-Z-3070. [Features] ◎ Lightweight and excellent for field work ◎ Passed the certification test by the Ministry of Land, Infrastructure, Transport and Tourism ◎ Performs simultaneous flaw detection at 2 channels with an auxiliary function for pass/fail judgment *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic Ultrasonic Testing Device for Drawn Steel Pipes

This is a device for fully inspecting electric welded steel pipes used in hydraulic cylinder cases for construction machinery!

The "Automatic Ultrasonic Testing Device for Drawn Steel Pipes" is a device that performs comprehensive testing on drawn electric-welded steel pipes used in hydraulic cylinder cases for construction machinery! Pipes placed in the stocker are cut out one by one, and while rotating on turning rollers, the ultrasonic testing head moves axially to conduct comprehensive testing. 【Features】 ◎ Available in types for large sizes and small diameters ◎ There are contact type and local immersion type ◎ Detects cracks on both surfaces generated in the axial direction ◎ Capable of inspecting lamination defects *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SAW welded steel pipe automatic ultrasonic testing device

The device can be equipped with a TOFD system for ultrasonic testing of seam welds in line pipes and other components from various directions!

The "SAW Welding Steel Pipe Automatic Ultrasonic Testing Device" is a device that conducts ultrasonic testing of seam welds, such as those in line pipes, from various directions and can also be equipped with a TOFD device. After placing the steel pipe on a cart and positioning the weld joint upwards, the testing head of the gantry-type testing mechanism makes contact with the pipe to perform the testing. 【Features】 ◎ Capable of testing pipes up to 3 meters in length. ◎ The probe is automatically calculated and positioned. ◎ Equipped with a weld tracking function. *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ERW mill automatic ultrasonic testing device

This is a device that is installed immediately after the welding of electric welded steel pipes and detects welding anomalies through ultrasonic testing!

The "ERW Millcon Automatic Ultrasonic Testing Device" is a device that is installed immediately after the welding of electric resistance welded steel pipes to detect abnormalities in the weld through ultrasonic testing. After placing the steel pipe on a cart and positioning the weld joint upwards, the testing head of the gantry-type testing mechanism contacts the pipe to perform the testing. After cutting the bead on both sides following electric resistance welding, ultrasonic testing is conducted using pulse reflection method or tandem method from both sides of the weld joint. 【Features】 ◎ Customizable device construction to match work size ◎ Capable of handling a variety of testing types ◎ Processing speed ≧ 45 m/min *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rotary-type automatic ultrasonic flaw detection device

This is a rotary ultrasonic testing device for full ultrasonic inspection of pipes and rebar!

The "Rotary Automatic Ultrasonic Testing Device" is a device for performing full surface ultrasonic testing of pipes and rebar. While vertically transporting the pipes and rebar, ultrasonic sensors rotate around the workpiece to conduct the testing. 【Features】 ◎ Capable of full body testing ◎ Workpiece size range is approximately φ20 to 100 ◎ Rotation speed is below 2000 rpm *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hydraulic cylinder block lining surface & interface automatic ultrasonic testing device

Detect delamination and surface defects! Color checks and ultrasonic testing can be performed simultaneously!

The "Hydraulic Cylinder Block Lining Surface & Interface Automatic Ultrasonic Testing Device" is a high-performance device that detects delamination and surface defects occurring in the curved copper lining section. Traditionally, inspections were conducted using color checks and manual ultrasonic testing, but this device allows both inspections to be performed simultaneously. It is compatible with a variety of products and has comprehensive rust prevention measures. 【Specifications】 ■ Line Specification: Inline Automatic Testing ■ Detection Results: Lining Layer Delamination / Surface Voids / Inclusions ■ Processing Capacity: Approximately 60 seconds per unit ■ Compatible Models: 5 to 10 types ■ Changeover: None *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automated labor-saving! Automatic ultrasonic testing device for power device heat sinks.

Can inspect 6 pieces simultaneously with high processing capability! Conduct internal inspection with high-speed scanning!

The non-destructive system "Automatic Ultrasonic Testing Device for Power Device Heat Sinks" is a device that performs internal inspection of large heat sinks for power devices through high-speed scanning. It retrieves heat sinks from a magazine placed in the work stocker and detects internal defects. After inspection, the workpieces are dried with warm air, printed, and then dispensed back into the magazine. It is a high-capacity device capable of inspecting six pieces simultaneously. 【Specifications】 ■ Line Specification: Offline Automatic ■ Detection Targets: Cracks / Voids ■ Changeover: None ■ Processing Capacity: 12 seconds per piece *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイヤ電子応用
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic ultrasonic flaw detector×ダイヤ電子応用 - List of Manufacturers, Suppliers, Companies and Products

Automatic ultrasonic flaw detector Product List